Vaillant Boiler Repair Service
Expert Gas Safe Registered Vaillant Boiler Service and Repair Specialist
I was recently asked to have look at an F.27 fault code on a Vaillant ecoTEC Plus 831 Combi boiler which wasn’t working, in Hillsborough, Sheffield S6. The customer said the boiler would try and fire up and immediately shut down.
Read More “Vaillant ecoTEC Plus 831 F.27 fault service and repair”
This was a repair on a Vaillant ecoTEC Pro 28 Combi boiler that I did yesterday in Darton, Barnsley, S75.The issue was that the radiators would start getting hot when the hot tap was being run, which is not an uncommon fault with combi boilers in general.
Read More “Vaillant ecotec radiators getting hot whilst running hot water”
This Vaillant repair job was for a customer in Rotherham which I did last week. The boiler was an old ecotec pro 28 which needed needed a service and needed the flexible rubber flow and return pipes replacing. The boiler had not been serviced in its 10 year life.
This was a little repair I did last week on a Vaillant ECOTEC Plus 831 Combination boiler in Rotherham, which had an intermittent F.75 fault. This fault happened mainly when the heating was on.
When the Customer called he was certain that the expansion vessel was the cause of the fault, and thought this would probably
This was a repair I did this week in Barnsley on a Vaillant ecotec plus 837. The boiler was losing pressure and working intermittently displaying the F.75 fault code. I was able to repair this boiler with one visit. If you are looking for a bit more information regarding this fault then check out my Vaillant ecotec F75 fault code page.
This was a boiler service job I did for a customer recently in Sheffield S11. The boiler was a Vaillant ecoTEC Exclusive 832 Combi boiler. They got in touch with me because of the experience I have with Vaillant boilers and decided I was the best person for the job.
This was the first of 6 jobs I did on Friday the 2nd of November for a good customer of mine who lives in Barnsley, S70. These 6 jobs included 4 repairs and 2 services. I only got in at 20:00 that evening but I was able to complete all 6 jobs!
This was an annual service of a Vaillant ecoMAX Pro 28 E heat only boiler, in Mosborough, Sheffield, S12.
I don’t come across many of these boilers in the area I work in to be honest. Most of them I come across are branded as Glowworm hxi boilers which is almost identical to the ecoMAX Pro. The ecoTEC Plus 400 Series which supersedes the ecoMAX Pro is also very similar.
This was a little service I did on a Vaillant TURBOmax Plus 824/2E I did for a customer in Doncaster in recently.
I don’t work on as many of these old TURBOmax’s anymore, there are still quite a few around but they are getting replaced and are slowly being phased out for newer high efficiency condensing models.
Today I serviced a second generation Vaillant ecoTEC PRO 28 combi boiler in Ecclesfield, Sheffield, S5.
I have been servicing this boiler for the last four years or so and it has continued to work reliably since it was fitted.
