I was asked to have a look at a Vaillant ecoTEC plus 415, 15KW heat only boiler in Sheffield, that would reset but was failing to light displaying the F.28 fault code. They had no hot water and no central heating.
Tag: ecotec
Vaillant ecoTEC Plus 637 repair Sheffield
This was a repair I did on a Vaillant System boiler which was an ecoTEC Plus 637, for a customer in Sheffield S10 this week. The issue being that they had no hot water and no central heating.
Vaillant ecotec plus 418 heat exchanger failure
This was a boiler I looked at this week for a good little customer who lives in Herringthorpe, Rotherham, S65. He called me to say his Vaillant ecotec plus 418 heat-only boiler was leaking and appeared to still be leaking even after the boiler had been turned off.
Vaillant ecotec plus 630 no central heating repair
This was a call I got to have a look at a Vaillant ecotec plus 630 system boiler in Wickersley, Rotherham, S66. The customer said the hot water was still working fine but the central heating would only work intermittently and that they often struggled to get it to come back on once it went off.
Read More “Vaillant ecotec plus 630 no central heating repair”
Vaillant ecotec plus 831 pump replacement
This was a repair on a Vaillant ecotec Plus 831 in Sheffield, S11. The pump was still working but was failing and was making a rumbling noise at certain speeds.
On these models the pump can vary its speed depending on the load on the system. As such I have found that often they may run quietly until they run at a certain speed at which point they can be quite loud.
Vaillant ecotec F.75 repair
This was a repair I did on a Vaillant ecotec pro which had stopped working altogether. The display was showing the dreaded, yet extremely common F.75 fault code. The early versions of the ecotec boilers were fitted with problematic pumps and early versions of the pressure sensors also suffered from issues.
Vaillant ecotec Pro 28 F61 repair
This was a repair I did today on a first generation Vaillant ecotec Pro 28 Combi boiler in Barnsley, S71.
The fault was an intermittent F.61 fault, allowing the boiler to be reset each time. Often is the case with these models that the printed circuit board starts to fail and presents the F.61 fault code.
Vaillant ecotec Plus 937 hot water repair
This was a repair I did this week on Wednesday, on a Vaillant ecotec Plus 937, in Norton, Sheffield, S11, South Yorkshire. The issue was with the hot water not working properly.
I can typically repair hot water issues with the 937 within one visit. I carry plenty of spares these models including the expensive actoSTOR pump that you will read about.
Vaillant ecotec pro 28 leaking condensate pipe
This was a service/repair job I did for a customer today in Rotherham, S61. Ive been looking after this particular boiler since 2015.
It has been well looked after by myself, and I don’t think it had any issues up until this point.