This was a repair I did last week in Dodworth, Barnsley, S75. The boiler was a pre 2012 Vaillant ecotec pro 28 which had an intermittent F.61 fault and was losing pressure as it had a leak. I was able to repair this boiler with one visit.
Tag: pro
Vaillant ECOTEC Pro 28 leaking condensate pipe
This was a little repair I did on a Vaillant ECOTEC Pro 28 in Sheffield S11 last week. I had been called as the boiler was low on pressure and was coming up with the F.22 fault code. Upon closer inspection there were other issues as well.
Vaillant ecotec Pro 28 F61 repair
This was a repair I did today on a first generation Vaillant ecotec Pro 28 Combi boiler in Barnsley, S71.
The fault was an intermittent F.61 fault, allowing the boiler to be reset each time. Often is the case with these models that the printed circuit board starts to fail and presents the F.61 fault code.
Vaillant ecoMAX Pro 28 E service
This was an annual service of a Vaillant ecoMAX Pro 28 E heat only boiler, in Mosborough, Sheffield, S12.
I don’t come across many of these boilers in the area I work in to be honest. Most of them I come across are branded as Glowworm hxi boilers which is almost identical to the ecoMAX Pro. The ecoTEC Plus 400 Series which supersedes the ecoMAX Pro is also very similar.
Vaillant ecotec pro 28 leaking condensate pipe
This was a service/repair job I did for a customer today in Rotherham, S61. Ive been looking after this particular boiler since 2015.
It has been well looked after by myself, and I don’t think it had any issues up until this point.
Vaillant ecoTEC PRO 28 service
Today I serviced a second generation Vaillant ecoTEC PRO 28 combi boiler in Ecclesfield, Sheffield, S5.
I have been servicing this boiler for the last four years or so and it has continued to work reliably since it was fitted.